Put the bike on main stand and keep the handle straight.
Then pull and push the handle to see any jerks. As a ideal condition, it should not produce any jerks at this condition. If there is jerks, please contact your nearest certified mechanic to rectify the problem.
If steering response is very soft or hard, then carry out below steps.
Tighten the central nut of steering handle by rotating spanner in clockwise direction.
Steering nut can be further adjusted by adjusting circular plate. Adjust the circular plate hitting with light force with the help of screw driver and hammer or spanner. If the steering is very tight, now need to perform this operation.
After tightening the both the nuts, leave the handle from center position.
Immediate after leaving the handle, handle should turn either right or left and shouldn't stand at center position.If the steering handle not steering from center position, loosen the adjustment nut and re-tight the central bolt based on requirement.
Steering is an important part which help you to drive properly. If in case of any problem with steering or for bike service or repair, please contact your next door, Doers certified mechanic.