Check the condition of oil and level of oil from side indicator
If the condition of oil is not good, (if the oil is in black colour) drain the complete oil or otherwise skip this instruction. To drain the oil, located the drain nut underneath the bike or motorcycle
Keep the oil catch or container to collect the oil and loosen the nuts by rotating in anticlockwise direction
Once the oil is completely drained, tighten the drain nut very tightly without damaging the washer or nut. Also you can check the condition of washer and nuts of drained oil. If the condition of washer or nut is not good, there will be chance of getting oil leak from the drain hole. Clean the drain location once its installed to inspect any oil leakage later on.
Rotate the lid initially with plier and then with hand in anti-clock wise direction and remove the lid (Image 1 of 2)
Rotate the lid initially with plier and then with hand in anti-clock wise direction and remove the lid (Image 2 of 2)
Get ready to top-up or refill the engine oil (if require, use funnel to pour the oil)
Once you poured required quantity of oil, letís cover the lid of the engine oil with plier and check for any leakage from the drain hole
If in case of any issue related to engine and other bike service, contact Doers certified mechanic at the earliest for door step service.